| Central Strength Member |
Material |
Steel Wire |
| Diameter（±0.05）mm |
1.5 |
| Loose Tube |
Material |
PBT |
| Diameter（±0.06）mm |
1.8 |
| Thickness（±0.03）mm |
0.32 |
| The Max.Core NO/Tube |
6 |
| Filler Rope |
Material |
LDPE |
| Color |
White |
| Diameter（±0.06）mm |
1.8 |
| Water Blocking layer（Material） |
Flooding Compound |
| Moisture Barrier |
Material |
Aluminum Tape |
| Thickness（±0.03）mm |
0.20 |
| Outer Sheath |
Material |
MDPE |
| Thickness（±0.2）mm |
1.8 |
| Cable Diameter（±0.2）mm |
9.5 |
| Cable Weight（±10）kg/km |
90 |
| Min. bending radius |
Without Tension |
10.0×Cable -φ |
| Under Maximum Tension |
20.0×Cable -φ |
| Temperature range（℃） |
Installation |
-20~+60 |
| Transport&Storage |
-40~+70 |
| Operation |
-40~+70 |
Fiber&Loose tube colors
Color No. of fiber: 1 Blue, 2 Orange, 3 Green, 4 Brown, 5 Gray, 6 White, 7 Red, 8 Black, 9 Yellow, 10 Violet, 11 Pink, 12 Aqua
Color No. of loose tubes: 1 Blue, 2 Orange, 3 Green, 4 Brown, 5 Gray, 6 White, 7 Red, 8 Black, 9 Yellow, 10 Violet, 11 Pink, 12 Aqua
The properties of single mode optical fiber (ITU-T Rec. G.652.D)
| G.652D Single-mode fiber characteristics |
| Characteristic |
Condition |
Data |
Unit |
| Optical properties |
|
|
|
| Attenuation |
1310nm |
≤0.35 |
dB/km |
| 1383nm |
≤0.34 |
dB/km |
| 1550nm |
≤0.21 |
dB/km |
| 1625nm |
≤0.24 |
dB/km |
| Relative wavelength attenuation
@1310nm
@1550nm
|
1285～1330nm
1525～1575nm |
≤0.03
≤0.02 |
dB/km
dB/km |
|
| Dispersion in the wavelength range of 1550nm |
— |
≤18 |
ps/(nm.km) |
| Zero dispersion wavelength |
— |
1312±10 |
nm |
| A zero-dispersion slope |
— |
≤0.092 |
ps/(nm².km) |
| zero-dispersion slope typical value |
— |
0.086 |
ps/(nm².km) |
| Cable cut-off wavelength λcc |
— |
≤1260 |
nm |
| Mode field diameter MFD |
1310nm |
9.2±0.4 |
μm |
| 1550nm |
10.4±0.5 |
μm |
| Effective group refractive index |
1310nm |
1.466 |
— |
| 1550nm |
1.467 |
— |
| Attenuation discontinuities |
1310nm |
≤0.05 |
dB |
| 1550nm |
≤0.05 |
dB |
| Geometric characteristics |
| Core diameter |
— |
124.8±0.7 |
μm |
| Cladding roundness |
— |
≤0.70 |
% |
| Coating diameter |
— |
245±5 |
μm |
| Coating / package concentricity error |
— |
≤12.0 |
μm |
| Coating no roundness |
— |
≤6.0 |
% |
| Core / package concentricity error |
— |
≤0.5 |
μm |
| The warpage (radius) |
— |
≥4 |
m |
| Environmental characteristics（1310nm、1550nm、1625nm） |
| Temperature additional attenuation |
-60℃ ～+85℃ |
≤0.05 |
dB/km |
| Flooding additional attenuation |
23℃，30 days |
≤0.05 |
dB/km |
| Hot and humid additional attenuation |
85℃ and 85% Relative humidity, 30 days |
≤0.05 |
dB/km |
| Dry heat aging |
85℃ |
≤0.05 |
dB/km |
| Mechanical properties |
| Screening tension |
— |
≥9.0 |
N |
| The macro bend Additional attenuation
1Circle Φ32mm
100Circle Φ50mm
100Circle Φ60mm
|
1550nm |
≤0.05 |
dB |
| 1310nm and 1550nm |
≤0.05 |
dB |
| 1625nm |
≤0.05 |
dB |
| Coating peeling force |
Typical average |
1.5 |
N |
| ≥13 ≤8.9 |
N |
| Dynamic fatigue parameters |
— |
≥20 |
— |
| NO. |
Item |
Requirement |
| 1 |
Allowable Tensile Strength |
Short Term |
1500 N |
| Long Term |
600 N |
| 2 |
Allowable Crush Resistance |
Short Term |
1000 (N/100mm) |
| Long Term |
300 (N/100mm) |
Main mechanical & environmental performance test
| Item |
Test Method |
Acceptance Condition |
| Tensile Strength
IEC 794-1-2-E1
|
- Load: Short term tension
- Length of cable: about 50m
|
-No fiber break and no sheath damage. |
| Crush Test
IEC 60794-1-2-E3
|
- Load: Short term crush
- Load time: 1min
|
-Loss change ≤0.05dB@1550nm
-No fiber break and no sheath damage.
|
| Impact Test
IEC 60794-1-2-E4
|
- Points of impact: 3
- Times of per point: 1
- Impact energy: 5J
|
-Loss change ≤0.1dB@1550nm
-No fiber break and no sheath damage.
|
| Temperature Cycling Test
YD/T901-2001-4.4.4.1
|
- Temperature step:
+20℃→-40℃→+70℃→+20℃
- Time per each step: 12 hrs
- Number of cycle: 2
|
-Loss change ≤0.05 dB/km@1550 nm
-No fiber break and no sheath damage.
|
English 
